Undergoung Utilities and their Standard Colors
Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. The OSHA requires that utilities underground first be located before digging through a piece of land. It is to prevent disaster. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.
Sometimes, even if the lines are marked accidents still happen. Utility lines are struck every 6 minutes, some place. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. This is then something that affects public health and safety.
With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. When locating utility lines underground, this machine makes it easy to do so. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.
It is easier to identify underground utility lines today because they now use different colors for each utility. Here are the colors used for different utilities.
If you see white lines, then these are proposed excavation sites. It locates areas that will be excavated in the near future.
Temporary survey markings use pink lines. Surveyors use pink lines to mark off legal property boundaries.
Red lines are used to mark electric power lines, cable, conduit, and lighting cable. This color is appropriate for electrical works since it is associated with fire and danger.
Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.
If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.